[JFryauff]

Try these...

In car:

To reset the display

The dealership performing the service resets the display when the service has been completed. The display is reset as follows:

- Switch the ignition on

- When the knob ==> fig. 16 -Arrow- (trip reset knob) is pulled, this message appears: SERVICE!.

- Pull the knob ==> fig. 16 -Arrow- until the display SERVICE IN ____ MI ____ DAYS appears in the display. If the reset button is not pushed within 5 seconds, the display reset mode closes.


There have been questions on the board before as to whether this procedure will set a 10,000 mile interval or 5,000 miles. When the interval is reset via the VAG diagnostic unit, it goes to 10,000 miles.

Vag-Com:

Audi has included a Service Interval Reminder that includes oil mileage interval, the service mileage interval, and the service time interval. To reset the Service Reminders using VAG-COM:

1998 and Newer:

[Select]
[17 - Instruments]
[Adaptation - 10]
Enter channel 02
[Read]
The "Stored Value" is the current value for that channel.
Enter the "New" value of 0 (zero)
[Test]
[Save]

Note: It is normal for the display to show something like "--/--" instead of an actual distance/time to service after resetting until you have driven some distance.