Quote:
Originally Posted by mk3vdubr
I cant think of what that wire would be... on my aftermarket harness i can identify what all the wires are doing with no extras, and my diagnostic port works fine. Unless its the blue wire used for system control for subs and whatnot, that wire should not be plugged into the harness even if its not being used for aftermarket speakers...
|
Thanks very much for the quick response. Funny you say the "blue" wire, I was just
beginning to suspect that wire might be the issue. I am not using any aftermarket speakers nor amplifiers. Was a simple replace of the stock radio with a Pioneer DEH 1900MP. I'll try disconnecting the blue wire thats part of the harness that came with the radio. We'll see....
Thanks again for your advice...
...Bob