Quote:
Originally Posted by houstonvwguy
Got the door panels from JBug today but am surprised that they don't include any clips......
|
Why include them when they will sell you some new for AJBP (additional jbug profit)
And yes they are hooked onto the panel. They get old and brittle and may break but not always. If you don't have any new and some break, just stagger them(every other hole) and you will be OK on the rear
. But on the front you pretty much need them all to hold the panel in place for when you close the door the panel will prolly come unattached. But be careful about installing them as they are not as thick as the original. And make sure you use the correct holes for your car. These are many year fit so extra holes punched into them. If you need new clips,get them before you install the panels. They are not "user friendly" for trying to remove.
derf
__________________
derf
No matter where you go,there you are.
My post are my opinion of what has worked for me but are not the gospel
What I post is what I do on my cars. I am here to try and help not to impress or boast
Replacing rear door panels in 74 Super Beetle Convertible
on the top and front side. Make sure you replace the rubber cup the clips set in. I think the back seat rest stop has to be removed also?
Linear Mode
