|
|
|
|
|||||||
| Register | Home | VW Forum | Active Topics | Search | Today's Posts | Mark Forums Read |
| Air-cooled Air-cooled VW - This is the discussion forum for Air-cooled VW (VW Beetle Forum, Volkswagen Beetle Forum, Volkswagen Beetle, Air Cooled VW Beetle, Air Cooled Classic VW Beetle, Classic VW Forum, Classic Volkswagen forum) |
 |
|
|
LinkBack | Thread Tools | Display Modes |
06-01-2006, 03:57 PM
|
|||||||||||
|
|||||||||||
Type 3 hubs
I have a '67 beetle, and I am going to mount it on a chassis from a '69 or '70. My questions is, will a type 3 hub bolt right up in place of the drum, or are the teeth on the axle and the teeth inside the hub different?
|
|
07-24-2006, 03:54 PM
|
|||||||||||
|
|||||||||||
|
So you're going to mount type3 read drums to a 4 joint beetle rear end, correct? If so then I'm 90% certain the splines are the same - you could do a quick count of the splines on the axle versus the splines in the drum to make sure -
|
Linear Mode
