Clutch and LW Flywheel kits forG60, Mk IV 1.8T,2.0,TDI

VWSickness · #1 (**permalink**) 02-04-2005, 09:06 AM

We're now offering Complete Stage I and Stage II SACHS VR6 clutch kits for all Corrado G60, Passat 16V & MK4 Golf/Jetta/NB 1.8T, 2.0L, TDI (kit will also work on any VW 4cyl that has been converted to 02A or 02J trans

All kits use SACHS VR6 clutch kits and OEM parts, and come complete with all mounting hardware needed for the install.

The stage 1 Kit is a cost effective and far better performing clutch set up than the OE MK IV Dual Diaphram clutch assembly.

The Stage I kits are rated between 275-300 ft/lbs. of TQ and include the SACHS VR6 clutch kit (PP, Disc, T/O bearing), Eurospec OEM 14 lb LW flywheel, and all pressure plate and flywheel bolts. ($399.95 shipped within the lower 48 states)

The Stage II kits are rated between 330-350 ft/lbs. of TQ and include a SACHS VR6 Power clutch kit (PP, Disc, T/O bearing), Eurospec OEM 14 lb flywheel, and all pressure plate and flywheel bolts. ($599.95 shipped within the lower 48 states)

E-mail me for info and shipping prices outside the continental U.S.

Kaos · #2 (**permalink**) 02-04-2005, 01:18 PM

Sweet deal

.Does this include the ring gear for the MK4 1.8T 1.9TDI & 2.0 conversion?

VWSickness · #3 (**permalink**) 02-04-2005, 01:40 PM

Yes the kit is complete (OE Flywheel with ring gear lightened to 14 Lbs, with VR6 clutch kit/ TO bearing and replacement clutch and flywheel stretch bolts.
[/quote]

mk-4gasm · #4 (**permalink**) 02-04-2005, 01:42 PM

ill probably be getting one if these in a few months

VWSickness · #5 (**permalink**) 02-04-2005, 01:55 PM

See if this works (probably won't knowing my BB expertise

Hopefully these pics will work.

Flywheel

Kit as explained above

VWSickness · #6 (**permalink**) 02-04-2005, 01:56 PM

So much for that idea

Handeye · #7 (**permalink**) 02-04-2005, 02:13 PM

Quote:

Originally Posted by VWSickness

See if this works (probably won't knowing my BB expertise

Hopefully these pics will work.

Flywheel

Kit as explained above

Fixed it for ya! Nice web-site by the way.

VWSickness · #8 (**permalink**) 02-04-2005, 02:17 PM

Thanks,

Howd ya do that

I suck, ive read the instructions and seen a couple threads on this subject and still cant figure it out

Handeye · #9 (**permalink**) 02-04-2005, 03:59 PM

Quote:

Originally Posted by VWSickness

Thanks,

Howd ya do that

I suck, ive read the instructions and seen a couple threads on this subject and still cant figure it out

It's a PITA sometimes to post pictures. Pull the pic you're looking for up on Internet Explorer, right click, select properties and click and drag over the address to highlight it. I like to hit CTRL+C to copy things. Then go hit the Img button on forums "post a reply" page. Then hit CTRL+V to paste the copied address and then click *img again.

Hit preview to check that it works.