if this ad is here, the vehicle is still available
Reluctantly I’m selling my 1990 Corrado g60 project. I’ve had the car since Feb 2019 and have done a ton of restoration work to it.
Highlights: engine was completed resealed. Supercharger was rebuilt by BBM (no miles on the new rebuild. See pics.).
Below is a list of some parts that were replaced.
*** UPDATE! UPDATE! UPDATE! ***
I recently change the intake manifold and tightened all the vacuum lines. Engine is running much better. Has rough idle but I was able to put some miles on it and it feels good.
Reluctantly I’m selling my 1990 Corrado g60 project. I’ve had the car since Feb 2019 and have done a ton of restoration work to it.
Highlights: engine was completed resealed. Supercharger was rebuilt by BBM (no miles on the new rebuild. See pics.).
Below is a list of some parts that were replaced.
*** UPDATE! UPDATE! UPDATE! ***
I recently change the intake manifold and tightened all the vacuum lines. Engine is running much better. Has rough idle but I was able to put some miles on it and it feels good.
02/16/19 | Battery |
Liquid Molly | |
Tire (1) | |
02/20/19 | Tire (3) |
01/31/19 | Bentley manual |
02/28/19 | Main shaft seal |
02/28/19 | Sachs clutch kit |
03/02/19 | Gearbox |
03/05/19 | Clutch alignment tool13 |
03/09/19 | Engine support bar |
03/11/19 | Transmission mount |
03/11/19 | Engine mount |
Engine mount | |
07/07/19 | Windshield washer pump & tank |
07/10/19 | Head gasket |
Oil pan gasket | |
Cylinder head bolts | |
11/02/19 | Lifters |
12/07/19 | Injector rebuild |
12/17/19 | Replacement injector |
03/23/20 | Shipped supercharger |
03/24/20 | Coolant hose clamp kit |
Coolant flange | |
Oil pan | |
Crush washer - 10mm | |
Crush washer - 8mm | |
Crush washer - 14mm | |
03/27/20 | Water pump |
Thermostat | |
03/28/20 | Dipstick funnel |
04/02/20 | Coolant hose - oil cooler/water pump to coolant flange |
04/03/20 | Coolant hose |
04/09/20 | Supercharger rebuild (by BBM) |
04/11/20 | 5th gear seal |
04/05/20 | Grill |
05/14/20 | Grill emblem |
07/03/20 | Injector seat |