VW Forum banner

1 - 1 of 1 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter #1
Hello I recently purchased a 1993 Fox wolfsburg edition non running from a friend He replaced the rotor, cap, spark plugs, and spark plug wires but had broke off the Pcv gromet after replacing that and the hose the engine starts and idles but idles very low and sound like it is misfiring. If you give it gas it will hang then flood itself out and stall. however with modulation of the throttle in the correct way (softly pushing it only about a cm then letting out and repeating) it will rev higher up to 2 or 3 k rpm only to then stall .I heard a vacuum leak, I was able to find it and plug fix it, only to have the same result. Any wisdom on this matter would be awesome.
 
1 - 1 of 1 Posts
Top