VW Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
45 Posts
Discussion Starter #1
Whats up folks im on my newest project i recently purchased a 2.Slow 94 Jetta GLS. The tranny was stuck in 3rd gear so i purchased a 8v 24 spline close ratio LTD. slip tranny to replace the stock. When i ran into the issue of the factory tranny had 28 spline.I believe the stock clutch is 210mm. So i was wondering what clutch would fit up to that tranny, in aspects to mm and spline count.And if any one has any aftermarket parts for sale for a 2.0 especially Turbo kits contact me. Thanks for your time Rando Commando p.s. Happy Belated Birthday VWForum

[ March 01, 2004: Message edited by: RandoCommando13 ]

[ March 08, 2004: Message edited by: RandoCommando13 ]
 

·
Registered
Joined
·
5,109 Posts
A 16v trans should have the same 28 spline "big" input shaft as the 2.0 trans. Sounds like you ended up with an 24 spline 8v trans, not a 16v trans.

A 210mm 8v clutch disc with the standard 2L flywheel and pressure plate should work fine.
 
1 - 2 of 2 Posts
Top