VW Forum banner

1 - 5 of 5 Posts

·
Registered
Joined
·
6 Posts
Discussion Starter #1
I hve just installed factory 6 disk changer in my 01 Passat. The changer is from an 01 Golf. The cds are skipping quite a bit and I wanted to know if there are any sensitivity settings or adjustments when you go from vertical mount (floor of truck) to horizontal mount (shelf in trunk)? Any help would be appreciated.

Thanks
 

·
Registered
Joined
·
8,124 Posts
I would probaly try to mount it in the same direction it came in. They have nothing to hold the cds in place if it is sopost to be mounted in the other direction.
Unmount it and place it in the orientation that it came on the origional car and see if it skips just laid on the floor or proped on the wall.
 

·
Registered
Joined
·
6 Posts
Discussion Starter #3
Well either no one knew the answer or I was just stupid. If you take off the mounting bracket, there is a small half circle of notches with a screw and an 'H' on one side and a 'V' on the other. It was as simple as that!

Thanks
 

·
Registered
Joined
·
6 Posts
Discussion Starter #5
Hey - the CD changer is working great now that it is set up right. Thank for the help.
 
1 - 5 of 5 Posts
Top