VW Forum banner

1 - 1 of 1 Posts

2 Posts
Discussion Starter #1
For sale are my recent retrofits which I completed a couple months back or so.

FX-R Bi-xenon projectors
6000K Apexcone Bulbs (less than 20 hours on them)
Spare set of Apexcone 6000K bulbs (less than 10 hours on them)
Apexcone slim ballasts w/ ignitors
Relay Kit to power you ballasts directly off the battery
Dual amber turn signals
I will also include the OEM repair wire that you will need to jumper the high-beams so they don't cut off when activated.

The FX-R projectors are modified Infinity FX OEM projectors which were originally purchased through The Retrofit Source. They are higher end projectors with an upgraded clear lens which provides a beautiful cut-off and that color-flicker you notice on TL/TSX projectors. It also has a separate cut-off shield for the high-beams (pictures below).

Only issue are that the backs are not sealed. Had to cut/shave the back cover to allow the projector to clear the back. I have run through some hard rain and the backs remain dry, no electrical issue, and no fogging ever. If you are serious about purchasing out-right I will seal them up for you before shipping them off.

These are fully functional, from the stock leveling gears to the bi-xenon setup. I did have to shave one of the leveling mounts in order for it to adjust properly, but it does not affect the look, performance, or longevity.

Price: $600 + stock lights in good condition OR $700 straight out (please note you will have to wait until I receive another set as these are my only lights as of now). Feel free to throw out reasonable offers.

PM me if you have any questions.

Most Recent Pics:



Before dual turns were installed:






Light spread:

1 - 1 of 1 Posts