VW Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
32 Posts
Discussion Starter · #1 ·
Eobdtool.co.uk engineer’s suggestion:
KT200/KTM200/ECUTuner, ECU Bench Tool, and PCMTuner are good choice. All of them support VAG MED17.5 on bench and can meet your requirement.

1.ECU BENCH Tool:
Gadget Cable Font Automotive lighting Wire

Supports VAG med17x via bench mode without opening ECU cover including:
VAG_MED17.1.1
VAG_MED17.1.6
VAG_MED17.1.10
VAG_MED17.1.21
VAG_MED17.1.27
VAG_MED17.1.61
VAG_MED17.1.62
VAG_MED17.1
VAG_MED17.5.1
VAG_MED17.5.2
VAG_MED17.5.5
VAG_MED17.5.20
VAG_MED17.5.21
VAG_MED17.5.25
VAG_MED17.5

  • Connection:
Connect ECUHelp ECU Bench Tool and ECU by the BENCH Cable
Connect ECUHelp ECU Bench Tool to computer by the USB cable
Supply power to ECU Bench Tool with the Power Adapter
Computer Personal computer Product Laptop Output device


Note: the wiring diagram can be found in ECUHelp 3.0 software.

  • Operation:
Open EBT software>> select the ECU type>> click Micro ID>> Click read or write to perform the function>> Save the data
Font Screenshot Line Software Technology


2.PCMTuner V1.27 with Fetrotech Tool:
Gadget Data storage device Font Material property Multimedia

Supports VAG med17x via bench mode including:
VAG_MED17.1.1
VAG_MED17.1.6
VAG_MED17.1.10
VAG_MED17.1.21
VAG_MED17.1.27
VAG_MED17.1.61
VAG_MED17.1.62
VAG_MED17.1
VAG_MED17.5.1
VAG_MED17.5.2
VAG_MED17.5.5
VAG_MED17.5.20
VAG_MED17.5.21
VAG_MED17.5.25
VAG_MED17.5

  • Connection:
Connect Fetrotech Tool Silver and PCMTuner ECU programmer by the mini gender changer (connector)
Connect the colored jumper to Fetrotech and ECU
Connect Fetrotech tool and computer by the USB cable
Plug the power adapter to Fetrotech tool, and then the power light is on.
Turn on the computer, and the USB light is on, start to test.
Computer Laptop Personal computer Output device Touchpad


  • Operation:
Run Fetrotech Tool software
Select the related ECU to perform the corresponding functions.
Micro ID >> read data>> write data
Font Gadget Computer Screenshot Display device


3.
KT200 ECU programmer
Product Gadget Output device Font Audio equipment


  • Connection:
Plug BENCH BOX into KT200 ECU programmer
Connect BENCH BOX and ECU with Pinout cable according to the wiring diagram in the KT200 software
Connect KT200 and computer via the USB cable
Computer Personal computer Table Peripheral Laptop


Electrical wiring Electronic engineering Engineering Cable Electronic component


  • Operation:
Run KT200 software
Select Driver
Select BENCH MODE>> VOLKSWAGEN>> TC1766-VAG>> ME17.5>> OK
Connect>> Read EEPROM>> Write EEPROM (incl.checksum correction)
Computer Blue Font Screenshot Software

Note: It requires to keep ECU power on during the process, just follow the on- screen prompt to do. You also can select the specific function (read/write all, read/write ext flash, read/write int flash micro) to do depending on your need.

All three ECU programmers are at the best price in 11.11 mega sale now.
ECU Bench Tool Full Version:
[No Tax]ECU Bench Tool Full Version ECUHelp with License Supports MG1 MD1 MED9 ECUs

V1.27 PCMtuner Plus Fetrotech Tool Silver version ECU Programmer:
PCMTuner 67 in 1 Modules Plus Fetrotech Tool ECU Programmer for MG1 MD1 EDC16 MED9.1 ECUs

V2022.10.01 KT200 ECU Programmer Master Version:
[Auto Version]KT200 ECU Programming ECU Maintenance Chip Tuning TC Code Removal
 
1 - 1 of 1 Posts
Top