VW Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
107 Posts
Discussion Starter #1
my 90 golf gl 4d project 4d gti i am doing a 1.8 8v top end and a 2.0 bottom end i need to know who make a header that will fit autotech or TT tuning since there both about the same price i need to know since next monday the motor is ganna be all to geather waiting for the header
thanks for your time
 

·
Registered
Joined
·
2,513 Posts
the 2.0 block is only a few mm's talelr so you can just get the header for your car and it should still bolt right up. As long as your using the same head it'll work. Just check for clearance after it's in around the firwall to make sure you don't get vibrations.
 

·
Registered
Joined
·
5,109 Posts
16mm taller actually. This may or may not be enough to make it hit the floor. Trial and error is the only way to tell. If one is going to fit, it's probably the autotech. TT sells race headers and street headers... if you get one from them go with the Bosal street header.

If you put a header on your car... absolutly replace all your motor mounts.

Also... you're selling you cam to buy a header? The cam will actually make more power!!
 
1 - 3 of 3 Posts
Top