VW Forum banner

1 - 5 of 5 Posts

·
Registered
Joined
·
7 Posts
Discussion Starter #1 (Edited)
2000 jetta vr6 auto. Just rebuilt the 01m tranny with all new clutches, steels, molded pistons, etc. Put it in the car today and have absolutely no reverse, just like another neutral gear, and very little movement in the forward gears, but at least they do engage. Put in all new solenoids and wire harness.

Am wondering if maybe my pump is bad or if I didn't get my torque converter in ask the way prior to the install and wrecked the pump.

Anybody have any other ideas, advice, etc. I know the 01m is pretty much a boat anchor but I have so much already invested and don't want to just throw it away.

Oh and btw it is not throwing any codes. No codes and no go

Please help

Jeff
 

·
Registered
Joined
·
7 Posts
Discussion Starter #4
Shift linkage reset, new torque converter installed, can't find anything wrong on internals. still same symptoms, wont go.
 

·
MK4 & MK5 Owner
Joined
·
8,444 Posts
Sounds like the tranny wasn't repaired right. Or not enough fluid to operate the valve body.
 
1 - 5 of 5 Posts
Top