VW Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
5 Posts
Discussion Starter #1
My ignition key froze the other day and had to be towed home. I ordered a new assembly which came with the wrong starter in one end and no key or cylinder. I removed the starter portion and replaced it with the one that was in my car. Thats the little plastic round thing in the opposite end from the cylinder. This way my wiring harness would plug in to it. I installed the cylinder in the other end so i could use my original key. Finished and key seems to work correctly. Steering locks Key only turns to start position like it should. Car starts, than immediately dies. Awhile back i had the instrument bezel out and tried to start the car without connecting it back up. It did the exact same thing, Started than died.I am hoping someone might have some knowledge of this.I could use some advice, Thx!
 

·
Registered
Joined
·
5 Posts
Discussion Starter #2
THIS IS AN UPDATE. I NOTICED I AM GETTING A KEY NOT IN RANGE CODE ON SCREEN WONDERING IF THERE IS A WAY TO BYPASS THE IMMOBILIZER?
 
1 - 2 of 2 Posts
Top