[cory7509]

Trying to get the plastic lower grille below the headlight on the driver side. Ecs and every other site sells the passenger with cut-out vents for air flow but every site with this part has the plastic molded all the way through. Can anyone find the part that would match the passenger grille?


http://www.ecstuning.com/Volkswagen-Jetta_IV--1.8T/Exterior/Body/Grille/

 

[_FUBAR_]

Wait what are you asking for? For them to be vented or not vented. You want them to.be vented. They are on the page you linked. If you want it vented more then just cut the back of it. That's what most do.

 

[cory7509]

Yes vented. But why sell the driver side with plastic-non vented and the passenger vented?

 

[Miller7204]

That's just how they come. The only way you'd get a vented one is if you cut the plastic out yourself.


Sent from AutoGuide.com Free App

 

[-vdub-]

the passenger side is vented for the factory smic on the 1.8t or auxiliary rad that the vr6 has i believe. the drivers side is meant to be not vented

 

[cory7509]

the passenger side is vented for the factory smic on the 1.8t or auxiliary rad that the vr6 has i believe. the drivers side is meant to be not vented

Yeah i have a cai running to the lower grille on that side. Just wanted the to get more air flow.

 

[vwGLI]

shouldnt be hard to cut some of it out with a dremel.

 

[cory7509]

shouldnt be hard to cut some of it out with a dremel.

That's exactly what I plan on doing when buying body parts, fabricating them myself.

 

[_FUBAR_]

I made my own body parts too. Made my legs out of old mailbox posts.