VW Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter · #1 ·
Hi, this is my first post here. My problem is that turbo doesn't work in my Mk4. I tried to replace MAF Sensor, N75 valve, N239 valve, turbo, vacuum pomp and fixed all vacuum leaks.

Log before cleaning MAP:

Address 01: Engine
Controller: 038 906 012 JJ
Component: 1,9l R4 EDC 0000SG 5539
Coding: 00102
Shop #: WSC 06402


2 Faults Found:
17552 - Mass Air Flow Sensor (G70): Open or Short to Ground
P1144 - 35-10 - -
17964 - Shareware Version. To Decode all DTCs
P1556 - 35-00 - Please Register/Activate
Readiness: N/A

Address 03: ABS Brakes
Controller: 1C0 907 379
Component: ESP 20 CAN V005
Coding: 18945
Shop #: WSC 31414
1 Fault Found:
01423 - Lateral Acceleration Sensor (G200)
27-10 - Implausible Signal - Intermittent


Log after cleaning MAP:

Address 01: Engine
Controller: 038 906 012 JJ
Component: 1,9l R4 EDC 0000SG 5539
Coding: 00102
Shop #: WSC 06402


1 Fault Found:
17552 - Mass Air Flow Sensor (G70): Open or Short to Ground
P1144 - 35-00 - -
Readiness: N/A


Address 03: ABS Brakes
Controller: 1C0 907 379
Component: ESP 20 CAN V005
Coding: 18945
Shop #: WSC 31414
No fault code found.


but still no turbo, the check engine dissapeared after cleaning MAP but still not turbo. What can I do?
 
1 - 3 of 3 Posts
Top