VW Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter #1
help anyone...my 90 corrado's oil pressure light will beep between 2k-3k rpms in any gear. It all started after I installed the stage 3 Autothority kit (fuel pres. reg, cam, chip, 68mm pulley) I just changed the oil/filter. Car seems to be running normal, but I don't want to blow up anytime soon. Any help would be appreciated. L8r!
 

·
Registered
Joined
·
4 Posts
Depending whether or not wiring on it is good that would be the first thing I would check. You say it's a 90, so that would make the most sense, however be very sure you don't have any leaks b/c even if you have plenty of oil a small seal in one gasket could cause that annoying buzzer to go off. By the way you are probably going to have your O2 light go on soon, don't be scared it comes on aprox. 80K on the dot (I had mine come on twice) All you realy need to do is get the emissions tested then you should be good to go. Good luck dude
 

·
Registered
Joined
·
180 Posts
if you don't hear any tapping from the engine then your probably safe... check the wiring and the sensor
 
1 - 4 of 4 Posts
Top