VW Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter #1
I have a 2004 awm 1.8t 158,xxx miles I was getting a random misfire, coil 1 coil 3 and coil 2 codes and I changed the plugs gapped them to .028 (autolite) changed the coils with import direct from oriellys and the car continues to miss at an idle (with no more codes) backfires under light throttle and clears up with more throttle I am by no means a import guy all of my knowledge is sbf so I’m at a total loss also I unplugged the maf it clears up for a few seconds and goes back to a rough idle I’m not getting a flashing cle or any type of code other than when I unplugged the maf any help would be greatly appreciated
 
1 - 3 of 3 Posts
Top