VW Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
5 Posts
Discussion Starter · #1 ·
One customer asked:

I want to do key learning on my VW Sharan 2012 ID48-A1. Which Xtool key programmer can do it?

Engineer answered:

The car model belongs to 4th Immobilizer system. For VW 4th and 5th immobilizer, you should use the following devices.

XTOOL X100 PAD2 Pro (comes with KC100 adapter)

XTOOL X100 PAD3 (comes with KC100 adapter)

XTOOL X100 PAD3 SE and adapter (optional)

Note: Because x100 pad key programmer is not compatible with kc100 adapter, so it cannot support the function.

How to Use KC100 with X100 PAD2/X100 PAD3/X100 PAD3 SE for 4th and 5th immobilizer:

Let’s take X100 PAD3 as an example. Since VW 4th and 5th Immo programming needs online programming, please make sure X100 PAD3 connect Internet before doing programming.

Operation steps:
1.Use the main cable and OBDII connector (or other relative connector) to connect between X100PAD3 and your car’s OBD port
2.Use USB to mini USB cable to connect between X100PAD3 and KC100
3.Switch ignition on position, then enter software as following steps:
Immobilization>> VW>> 4th/5th Immobilizer System



4.If your car is 4th immobilizer system, please click 4th immobilizer system.

If your car is 5th immobilizer system, please click 5th immobilizer system.

It will detect your meter type automatically, if it does not detect successfully, you can choose your meter type manually.




5.Then follow the instructions that software reminds you to copy new keys
 
1 - 1 of 1 Posts
Top